PEI Machining and UL1000 Machining Fixtures
PEI has very good mechanical properties, high dimensional stability, and certain wear resistance. The disadvantage is that it has poor corrosion resistance and is not resistant to organic solvents. For example, it is brittle after contact with alcohol. This needs to be considered by designers. In addition, it is one of the more successful materials to replace PEEK.
PEI machining or UL1000 machining is very ideal, it is easier to CNC machining, the surface roughness is good, the dimensional tolerance stability is relatively high, close to PEEK, or some cavity parts have better dimensional performance than PEEK.
UL1000 machining, PEI machined parts have a wide range of applications. In the electroplating industry, considering that PEI is a clean material, and its cost is lower than that of PEEK, it is also commonly used in various occasions.
Because Chengtu Plastics serves apple fixtures, it processes PEI machined, PEEK machined, and UL1000 machined parts all year round. It has stricter tolerance and dimension control of products, high production efficiency, and has a large number of standing stocks in stock with complete specifications. Fast and efficient service to high-quality customers.
The performance of PEI machined parts is also very good when drilling micro-holes, with few burrs and high dimensional stability. The 0.15mm/0.2mm/0.22mm micro-holes have been processed by the plastics in the drawing. The roundness is high, the hole diameter error is small, the burr is less, and the CNC machining is easier.