1, the advantages of surface finishing processing technology When various treatments are applied to harden a metal material, the toughness of the material is reduced and cracks may occur on the surface. However, if the WPC metal surface is treated, the residual compressive stress inside the metal material can be increased, the critical value of the crack can be increased, and the strength can be increased, and the life of the component can be greatly improved. In addition, the WPC metal surface treatment process can prevent oil film rupture, and has the effect of reducing friction and wear. As mentioned above, because the metal surfaces treated by WPC metal surfaces contribute to oil accumulation, the metals are in less contact with each other, so friction is reduced, and mechanical noise is reduced. This reduction is unmatched by any modern oil additive. Good lubrication of hardened or sliding surfaces. In addition to hC treatment, other materials can be used to coat the surface. However, in this method, there is a large difference in strength between the cladding material and the matrix material, and peeling problems may occur. The WPC metal finish process is good because it takes the structure from surface to 0.01 N depth. As a result, there is no difference between the boundary and material between the high hardness part and the substrate, so no stripping occurs.
2, surface finishing processing technology processing scope and application WPC metal finish is effective on all surfaces inside and outside the machine where increased strength is required. This is especially effective for sliding surfaces and machine parts that require lubrication. If the WPC metal surface treatment process is carried out on a variety of machines with high friction, the machine will feel better. Because WPC metal finishing is not a new technology developed for an industry, it is not widely known. However, people gradually realized that it could increase strength and make parts compact.
